Ó¢ÎăÈÈÝ
The double-sided adhesive on the back of the AGV magnetic stripe can be fixed. Before placing the magnetic stripe, the ground must be dry, neat and clean.
The line can be drawn in advance to ensure that the laying is more beautiful. In order to ensure that the magnetic strip and the ground double-sided tape play a full role, the magnetic strip needs to be gently pressed down after pasting.At the turn, the magnetic strip can be folded and filled into a curved shape, and then slowly paste, the excess magnetic strip can be cut off with scissors, if there is a lack of magnetic strip, the magnetic strip can be folded and filled directly to the standby magnetic strip, after the paste is completed, the same magnetic strip bending and filling to the magnetic strip;In addition, special attention should be paid to the turning range is not too large, first of all to prevent the AGV car derailment, and then more convenient, more beautiful.
After the installation of the auxiliary device, a protective film wider than the magnetic strip can be affixed on the surface of the magnetic strip of AGV, which can effectively prevent the wear of the magnetic strip surface, and also prevent water and oil dirt from seeping into the glue of the magnetic strip, causing problems such as weak adhesion of the magnetic strip.
Now many places are used buried geomagnetic nail navigation, buried magnetic strip navigation, buried magnetic strip can effectively prevent the AGV car overloading roll over problem, buried geomagnetic nail navigation convenient construction, and beautiful;Effectively prevent the phenomenon of magnetic strip demagnetization when outdoor road is exposed to sunlight.
Shenzhen UWAT Technology Co., Ltd. Mr. Xie 13342911132
